AksuSynergy POE SE E Series Expander Super Synthetic Coolant
Synergy POE SE E series expander super synthetic coolant is a kind of developed for waste heat recovery. It uses synthetic ester (POE) as base oil and is added with additives such as extreme pressure, anti-wear, anti-corrosion and anti-oxidation.
Category:
AksuSynthetic refrigeration lubricating oil
Product Description
Synergy POE SE E series expander super synthetic coolant is a kind of developed for waste heat recovery. It uses synthetic ester (POE) as base oil and is added with additives such as extreme pressure, anti-wear, anti-corrosion and anti-oxidation. It has the characteristics of good high temperature and low temperature performance, good compatibility with R245fa and excellent thermochemical stability. The product is divided into 68 and 100 grades according to the kinematic viscosity of 40 ℃.
Performance characteristics
1. With the refrigerant R245fa refrigerant has good mutual solubility, put an end to the phenomenon of blockage, to ensure that the evaporator, condenser no oil deposition, so that the system has a good oil return efficiency;
2. Good thermal and chemical stability, compatible with metal and non-metal materials in the system, to ensure long-term normal operation of the compressor under harsh conditions;
3. Excellent lubricity, minimize wear, prolong the life of the compressor and reduce energy consumption.
Product Application
Synergy POE SE E series expander coolant quality is excellent, can be used for large industrial waste heat recovery with expander, refrigeration and high temperature heat pump system.
Precautions
1. The entire lubrication system should be cleaned before use of this product;
2. This product is not recommend mixed with other oil products;
3. After the product is enabled, the barrel cover should be tightened in time to avoid mixing with water and impurities;
4. This product has strong water absorption. Pay attention to sealing during storage and use to minimize contact with air;
5. This product should be stored in a dry, cool and ventilated place.
Scope of application
Synergy POE SE E series expander coolant is compatible with refrigerant and metal materials such as steel, copper and aluminum. Good compatibility with PET film; Compatible with XH-7 and XH-9 desiccant; Suitable for lubrication of various expanders and compressors using high temperature refrigerants such as R245fa. Applicable temperature:-40~180 ℃.
oil product solubility
A. Test process
Test method: SH/T0699-2000 refrigerant oil compatibility test method.
Test process: pour refrigerating machine oil into the pressure-resistant glass tube, evacuate, cool to below -50 ℃, and inject refrigerant. Raise or lower to a certain temperature, observe the pressure inside the glass tube and the physical state of the refrigeration oil and refrigerant.
B. Test conditions
The solubility performance of coolant and R245fa is shown in the following table:
| Temperature ℃ | Oil content% | Dissolution |
| 25/30/40/5060/70/75 | 5.5 | Homogeneous, clear and transparent |
| 25/30/40/5060/70/75 | 14.5 | Homogeneous, clear and transparent |
packing form
200L iron drum packaging
Typical data| Analysis Project | 40°C Kinematic viscosity mm²/s | 100°C kinematic viscosity mm²/s | Flash Point ℃ | Pour point ℃ | Acid value mgKOH/g | Corrosion (T2Cu100 ℃,3h) | 24 ℃ Foam ml/ml | 93 ℃ Foam ml/ml | Foam after 24 ℃ ml/ml | Mechanical impurities% |
| Test Method | GB/T 265 | GB/T267 | GB/T267 | GB/T3535 | GB/T7304 | GB/T5096 | GB/T12579 | GB/T12579 | GB/T12579 | GB/T511 |
| SE 68E | 67.22 | 8.012 | 246 | -43 | 0.03 | 1b | 10/0 | 15/0 | 10/0 | None |
| SE 100E | 98.27 | 11.76 | 254 | -39 | 0.04 | 1b | 10/0 | 15/0 | 10/0 | None |
Contact Information
77 Chaoyang Street, Linshu County, Linyi City, Shandong Province